Weather / Environment
The ADS-WS1 is a complete low-cost APRS weather station suitable for direct connection to a radio (no TNC required) or a PC (via RS-232). It also includes voice synthesis capability to read current weather conditions over the air without a PC.
Weather / Environment
Base unit only (not including wind and rain sensors) for the ADS-WS1 weather station.
Weather / Environment
The WR-01 is a simple yet powerful wind and rain measurement system. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Weather / Environment
The WR-01 is a simple yet powerful interface for our wind and rain sensor set. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Weather / Environment
This package includes an anemometer and wind vane for measuring wind speed and direction, a tipping bucket type rain gauge with 0.011 inch resolution, a metal mast, cables, and mounting hardware. No electronics are included.
Weather / Environment
Replacement anemometer assembly with RJ11 modular connector, for use with our wind/rain sensor assembly or the ADS-WS1 weather station. The datasheet provides information on hook-up.
Weather / Environment
Replacement wind vane for the ADS-WS1 wind/rain sensor assembly. The datasheet provides information on hook-up.
Weather / Environment
This tipping bucket rain gauge has a magnetic reed switch that closes momentarily each time the gauge measures 0.011″ (0.2794 mm) of rain. The 9 foot (3 meter) cable terminates in an RJ11 modular plug, and can easily be extended using a common telephone extension cable. The gauge can be easily connected to an Arduino, [...]
Other Cables and Connectors
Cable with female DB9 connector and bare wires (5 positions wired)
Other Cables and Connectors
Cable with male DB9 connector and bare wires (5 positions wired)
