This package includes an anemometer and wind vane for measuring wind speed and direction, a tipping bucket type rain gauge with 0.011 inch resolution, a metal mast, cables, and mounting hardware.
No electronics are included. The sensor assembly can be connected to our ADS-WS1 base unit, or you can use it as a starting point for your own weather station design. The datasheet provides information on hook-up.
| Weight | 2 lbs |
|---|---|
| Dimensions | 12 × 12 × 4 in |
Be the first to review “Wind / Rain Sensor Assembly”
Related products
Weather / Environment
The ADS-WS1 is a complete low-cost APRS weather station suitable for direct connection to a radio (no TNC required) or a PC (via RS-232). It also includes voice synthesis capability to read current weather conditions over the air without a PC.
Weather / Environment
The WR-01 is a simple yet powerful wind and rain measurement system. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Weather / Environment
Base unit only (not including wind and rain sensors) for the ADS-WS1 weather station.
Weather / Environment
Replacement wind vane for the ADS-WS1 wind/rain sensor assembly. The datasheet provides information on hook-up.
Other Cables and Connectors
Cable with female DB9 connector and bare wires (5 positions wired)
Weather / Environment
This tipping bucket rain gauge has a magnetic reed switch that closes momentarily each time the gauge measures 0.011″ (0.2794 mm) of rain. The 9 foot (3 meter) cable terminates in an RJ11 modular plug, and can easily be extended using a common telephone extension cable. The gauge can be easily connected to an Arduino, [...]
Other Cables and Connectors
Cable with male DB9 connector and bare wires (5 positions wired)
Weather / Environment
The WR-01 is a simple yet powerful interface for our wind and rain sensor set. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Reviews
There are no reviews yet.