Base unit only (not including wind and rain sensors) for the ADS-WS1 weather station. This unit includes temperature, barometric pressure, and humidity sensors, and will connect to a PC or TNC or directly to a radio.
The ADS-WS1 is a complete low-cost APRS weather station suitable for direct connection to a radio (no TNC required) or a PC (via RS-232). It also includes voice synthesis capability to read current weather conditions over the air without a PC.
| Weight | 0.6 lbs |
|---|
Be the first to review “ADS-WS1 Base Unit”
Related products
Other Cables and Connectors
Cable with female DB9 connector and bare wires (5 positions wired)
Weather / Environment
The ADS-WS1 is a complete low-cost APRS weather station suitable for direct connection to a radio (no TNC required) or a PC (via RS-232). It also includes voice synthesis capability to read current weather conditions over the air without a PC.
Other Cables and Connectors
Cable with male DB9 connector and bare wires (5 positions wired)
Weather / Environment
The WR-01 is a simple yet powerful wind and rain measurement system. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Weather / Environment
This tipping bucket rain gauge has a magnetic reed switch that closes momentarily each time the gauge measures 0.011″ (0.2794 mm) of rain. The 9 foot (3 meter) cable terminates in an RJ11 modular plug, and can easily be extended using a common telephone extension cable. The gauge can be easily connected to an Arduino, [...]
Weather / Environment
Replacement anemometer assembly with RJ11 modular connector, for use with our wind/rain sensor assembly or the ADS-WS1 weather station. The datasheet provides information on hook-up.
Weather / Environment
The WR-01 is a simple yet powerful interface for our wind and rain sensor set. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Reviews
There are no reviews yet.