Weather / Environment
Replacement wind vane for the ADS-WS1 wind/rain sensor assembly. The datasheet provides information on hook-up.
Weather / Environment
This tipping bucket rain gauge has a magnetic reed switch that closes momentarily each time the gauge measures 0.011″ (0.2794 mm) of rain. The 9 foot (3 meter) cable terminates in an RJ11 modular plug, and can easily be extended using a common telephone extension cable. The gauge can be easily connected to an Arduino, [...]
APRS and Packet Radio
The T3-135 is a Tracker3 APRS board designed to fit the Alinco DR-135T
APRS and Packet Radio
Bundle including the OpenTracker USB tracker, GPS receiver, and radio interface cable
APRS and Packet Radio
Please note that the GPS model pictured has been discontinued. The unit you receive will be functionally equivalent but may differ slightly in technical specifications from those shown below. The ADS-GM1 is a high-sensitivity GPS receiver based on the SiRFstar III chipset. It has a 2-meter long cable terminated in a female DB9 connector that [...]
APRS and Packet Radio
The Radio Shield is an add-on kit for the Arduino development board that provides AX.25 packet radio send and receive capability, a prototyping area, and an HD44780-compatible LCD interface.
APRS and Packet Radio
Protocol translator cable to connect an APRS-capable Kenwood radio to a Garmin nüvi 350 series navigator
APRS and Packet Radio
Protocol translator cable to connect an NMEA-capable device to a Garmin nüvi 350 series navigator
Other Cables and Connectors
4-conductor tip-ring-ring-sleeve (TRRS) connector, suitable for use with our T3-Micro tracker