Connects any of our standalone trackers to a handheld radio with a 3.5mm stereo mic jack and 2.5mm mono earphone jack. This configuration is used on most Kenwood handhelds and Chinese imports, including the Puxing PX-777. Power is provided through a 1-amp fused cigarette lighter plug with power indicator LED, or optionally an unfused Anderson Power Pole connector. Cable length is 19″ / 50 cm.
Wiring:
| D-Sub | 3.5mm | 2.5mm | Power |
|---|---|---|---|
| 1 | Ring | ||
| 3 | Sleeve | ||
| 5 | Tip | ||
| 6 | Gnd | Gnd | |
| 7 | + |
| Weight | 0.2 lbs |
|---|
Be the first to review “Tracker Cable – Yaesu Mobile RJ11+Speaker (CT-M3)”
Related products
APRS and Packet Radio
Connects a tracker to a handheld radio with a 3.5mm mono earphone jack and 2.5mm mono mic jack
Simplex Repeater
Connects the ADS-SR1 or EchoBridge to Kenwood, Baofeng, and similar handheld radios
Radio Interface Cables
This adapter allows the EchoBridge or the ADS-SR1 repeater to be connected to a Motorola MaxTrac, Radius, or GM300 series radio having a 16-pin accessory connector.
APRS and Packet Radio
Connects any of our stand-alone APRS trackers to a Kenwood mobile radio with an RJ45 microphone jack and 3.5mm speaker jack
Simplex Repeater
EchoBridge and ADS-SR1 repeater interface cable for use with Yaesu mobile radios having an RJ12 microphone jack. The 3.5mm plug connects to the radio's speaker jack.
Simplex Repeater
EchoBridge and ADS-SR1 repeater interface cable for many ICOM mobile radios.
Simplex Repeater
Connects the ADS-SR1 or EchoBridge to many Motorola handheld radios
Simplex Repeater
Connects the ADS-SR1 or EchoBridge to many Yaesu/Vertex Standard handheld radios
Reviews
There are no reviews yet.