Speaker/mic cable with 3.5mm TRRS connector for many varieties of Yaesu/Vertex Standard radios, including the VX-110, VX-150, VX-1R, VX-2R, VX-3R, VX-5R, FT-10R, and FT-60R. Right-angle 3.5mm, 4-conductor connector. Cable length is 60 cm / 24 inches, with pre-stripped and tinned leads.
All of our speaker mic cables should be wired as followed:
Red – Speaker
White – Mic
Black – Ground
You should check that the connections match your particular radio. The programming/cloning connection is NOT present in these cables and the extra wire is connected to ground.
| Weight | 0.2 lbs |
|---|
Be the first to review “Speaker Mic Cable – Yaesu/Vertex Standard Type”
Related products
Radio Interface Cables
This adapter allows the EchoBridge or the ADS-SR1 repeater to be connected to a Motorola MaxTrac, Radius, or GM300 series radio having a 16-pin accessory connector.
Radio Interface Cables
Speaker/mic cable for ICOM and other radios with jacks on the side
Radio Interface Cables
Female DB9 to 8-pin mini-DIN cable for low speed data with the ICOM ID-800 D-STAR radio. This cable is equivalent to ICOM part number OPC-1384, and is used for low-speed data, not radio programming. We carry a low-profile male-male null modem adapter that allows this cable to be used with a GPS receiver for DPRS [...]
Radio Interface Cables
Speaker/mic cable for various Motorola handheld radios
Radio Interface Cables
Clamp-on ferrite RFI filter for cables 3 to 5 mm in diameter.
Simplex Repeater
Connects the ADS-SR1 or EchoBridge to many Yaesu/Vertex Standard handheld radios with a screw-in connector
Simplex Repeater
EchoBridge and ADS-SR1 repeater interface cable for most Kenwood mobile radios having an RJ45 microphone jack
Simplex Repeater
Connects the ADS-SR1 or EchoBridge to Kenwood, Baofeng, and similar handheld radios
Reviews
There are no reviews yet.