Speaker/mic cable for many radio types, including numerous ICOM models. Right-angle with 3.5mm, 2-conductor plug and 2.5mm, 3-conductor plug spaced 10 mm apart. Cable length is 60 cm / 24 inches, with pre-stripped and tinned leads.
Connections:
White – Mic
Red – Speaker
Black – Ground
You should check that the connections match your particular radio. Connections used only for cloning or programming are NOT present in these cables. These cables are not compatible with ICOM air band radios that have PTT on a separate wire.
| Weight | 0.2 lbs |
|---|
Be the first to review “Speaker Mic Cable – ICOM Type”
Related products
Radio Interface Cables
Clamp-on ferrite RFI filter for cables 3 to 5 mm in diameter.
Radio Interface Cables
This adapter plugs into the GM300's 16-pin accessory port and adapts it to the 6-pin Mini-DIN packet data connector common in the amateur radio world
Simplex Repeater
EchoBridge and ADS-SR1 repeater interface cable for many ICOM mobile radios.
Simplex Repeater
EchoBridge and ADS-SR1 repeater interface cable for use with Yaesu mobile radios having an RJ12 microphone jack. The 3.5mm plug connects to the radio's speaker jack.
Radio Interface Cables
Speaker/mic cable for various Motorola handheld radios
APRS and Packet Radio
Connects a tracker to a handheld radio with a 3.5mm stereo earphone jack and 2.5mm stereo mic jack.
Simplex Repeater
Connects the ADS-SR1 or EchoBridge to various mobile radios with a 3.5mm speaker jack
Simplex Repeater
EchoBridge and ADS-SR1 radio interface cable for the TYT TH-9000D mobile radio.
Reviews
There are no reviews yet.