A few of our devices, like the ADS-WS1 weather station, are configured via RS-232 serial rather than USB and need an adapter to connect to most modern PCs. This is a generic USB to serial adapter that’s been tested to work with our products.
| Weight | .15 lbs |
|---|
Be the first to review “Serial to USB Adapter”
Related products
Weather / Environment
The ADS-WS1 is a complete low-cost APRS weather station suitable for direct connection to a radio (no TNC required) or a PC (via RS-232). It also includes voice synthesis capability to read current weather conditions over the air without a PC.
Weather / Environment
This tipping bucket rain gauge has a magnetic reed switch that closes momentarily each time the gauge measures 0.011″ (0.2794 mm) of rain. The 9 foot (3 meter) cable terminates in an RJ11 modular plug, and can easily be extended using a common telephone extension cable. The gauge can be easily connected to an Arduino, [...]
Weather / Environment
Base unit only (not including wind and rain sensors) for the ADS-WS1 weather station.
Extras
DC wall adapter with 2.1 mm center positive plug. Suitable for use with the OT2m, OT3m, and ADS-SR1.
Weather / Environment
Cable with male DB9 connector and bare wires (5 positions wired)
Weather / Environment
The WR-01 is a simple yet powerful interface for our wind and rain sensor set. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Weather / Environment
Replacement wind vane for the ADS-WS1 wind/rain sensor assembly. The datasheet provides information on hook-up.
Reviews
There are no reviews yet.