The ADS-WS1 is a complete low-cost APRS weather station suitable for direct connection to a radio (no TNC required) or a PC (via RS-232). It also includes voice synthesis capability to read current weather conditions over the air without a PC.
Kit includes:
- Anemometer
- Wind Vane
- Rain Gauge
- 2-Part Mast
- Mounting Hardware
- Electronics
The electronics package includes temperature, barometric pressure, and humidity sensors, plus 2 MB of flash memory for voice synthesis and data logging. The box should be mounted in a sheltered location, or used indoors and connected to external sensors. Currently only an external temperature sensor is supported.
With the current firmware, serial port 1 puts out 2400 baud data in Peet Bros data logger format and has been tested to work with Virtual Weather Station and Weather View 32.
| Weight | 2.2 lbs |
|---|---|
| Dimensions | 12 × 12 × 4 in |
Be the first to review “ADS-WS1 Weather Station”
Related products
Other Cables and Connectors
Cable with male DB9 connector and bare wires (5 positions wired)
Weather / Environment
Replacement anemometer assembly with RJ11 modular connector, for use with our wind/rain sensor assembly or the ADS-WS1 weather station. The datasheet provides information on hook-up.
Weather / Environment
Replacement wind vane for the ADS-WS1 wind/rain sensor assembly. The datasheet provides information on hook-up.
Weather / Environment
This tipping bucket rain gauge has a magnetic reed switch that closes momentarily each time the gauge measures 0.011″ (0.2794 mm) of rain. The 9 foot (3 meter) cable terminates in an RJ11 modular plug, and can easily be extended using a common telephone extension cable. The gauge can be easily connected to an Arduino, [...]
Weather / Environment
Base unit only (not including wind and rain sensors) for the ADS-WS1 weather station.
Weather / Environment
This package includes an anemometer and wind vane for measuring wind speed and direction, a tipping bucket type rain gauge with 0.011 inch resolution, a metal mast, cables, and mounting hardware. No electronics are included.
Weather / Environment
The WR-01 is a simple yet powerful interface for our wind and rain sensor set. It allows simple interfacing of weather sensors for PLCs, PCs, SBCs, and embedded devices
Reviews
There are no reviews yet.